Make Water-Based Alcohol-Free Perfume

Make mild, alcohol-free fragrances with an innovative "water base" that eliminates alcohol.

Recommended for those who are bothered by the smell of alcohol,
and for those who want to enjoy pure dreadlocks.

Formulated with a combination of allergen-free fragrance oils,
the fragrance is soft and luxuriously scented while minimizing skin irritation.

01

Need to prepare

Material ㅣ

Ingredients for a water-based non-alcoholic perfume ㅣ

Clear Water Perfume Base, Fresh Yuza Leaves (Allergen-Free) Fragrance oils, Castor Liquid Solubilizer CW-S,
LE BLANC 50 (Matte White Titan Overcap)

Basic ingredients for making perfumeㅣ
Perfumery Electronic Scale 0.01g/500g, Glass Beaker 100ml, Glass Beaker 50ml, Glass Rod, Disposible Plastic Pipettes 3ml, Perfume Bottle Capping Machine 3-in-1 (or CW Spray Tool), Mini Funnel

Packaging Materialsㅣ
06. LE BLANC 50 Perfume Box, Avec Creme Printed Satin Ribbon (9mm/1 Roll), Layer of Perfume Label (Square)

02

Measure fragrance oils

Using a 50 ml glass beaker, measure out 2.5 grams of allergen-free fragrance oil (Fresh Yuzu Leaf)
(based on a 50 ml perfume glass)
Typical eau de parfum is made with a 10-15% fragrance load, If you are using an alcohol-free water perfume base,
it is made with a maximum fragrance load of 5%.
* Depending on the characteristics of the fragrance, such as its aromaticity and viscosity, the mixing ratio may vary,
so it is recommended to consult the IFRA documentation before mass production.

03

Metering liquid solubilizers

Place a 50 ml glass beaker with the fragrance oil on the balance and then Liquid Solubilizer (CW-S) 2.5 g.
(2.5 g of fragrance oil + 2.5 g of liquid solubilizer)

04

Mixing solubilizers

Stir vigorously with a glass wand for at least 1 minute to ensure that the fragrance oil and liquid solubilizer are well mixed.
Because water fragrance bases are composed of water-based ingredients,
they must be emulsified when adding oil-based fragrance oils to them. This must be done to the fragrance first. Emulsify the fragrance oil and liquid solubilizer in a 1:1 ratio.
If you use the right naturally derived emulsifiers for your fragrance oils and the right percentage of fragrance,
you can create water fragrances that don't separate.However, if the emulsification process is not perfect, the fragrance may separate.In this case, you can increase the amount of liquid solubilizer to a 1:2 ratio or try using a different type of solubilizer.

* Because each fragrance oil has different properties, we recommend testing small batches before mass production.

** After launching the first fabric mist in Korea in July 2015, CW introduced how to make fabric deodorant using liquid solubilizer to prevent oil layer separation.

05

Measuring a water perfume base

Using a new 100 ml glass beaker, measure out 45 g of clear water base. (Based on a 50 ml perfume glass, minus 2.5 g of fragrance and 2.5 g of liquid solubilizer.)

* Perfume bases and fragrance oils have different specific gravities of water (the relative ratio to the density of the substance they are based on), so when converted to g, the unit of weight, ml may differ from ml.

** Water perfume bases are fully formulated with both UV stabilizers and antioxidants to protect fragrances that are vulnerable to light and oxidation. Because they are water-based, they also contain microbial inhibitors that are safe for cosmetic use on the skin to prevent microbial growth (not typical preservatives).
*** The water base has been hypoallergenic tested by the OATC Skin Clinical Testing Center,
with an irritation index of 0.03.

06

Mix the water perfume base

To the 100ml glass beaker containing the water base, add half of the fragrance oil and
liquid solubilizer mixed in the 50ml glass beaker beforehand, mix thoroughly, and then add the other half.

* Clear Water Base' is a clear liquid, which can be used for a perfume concept that expresses the feeling of pure and clean water, and 'White Water Base' is a clear suspension liquid, which can be used for a perfume concept that expresses a soft and milky feeling. You can choose according to your taste and perfume concept.

07

Put the perfume in a glass bottle

Using a mini funnel, steadily pour the finished perfume into a LeBlanc 50 perfume glass.

08

Securing the spray

Cut the spray nozzle diagonally, slightly longer than the bottom, based on the shoulder line of the perfume glass bottle.To fix the spray nozzle on the perfume glass, you can use the ‘Perfume Bottle Capping Machine 3 in 1’ for easy fixation.
If you are using the CW Spray Tool, you can secure it by aligning the spray rim line with the perfume opening and applying palm pressure from above.

09

Finalizing

Decorate the finished perfume with labels and finish with special perfume packaging boxes and ribbons.

* Photo shows Layer of Perfume Label (Square), Avec Cream Print Ribbon (9mm/1 roll).

This content is copyrighted by Chromaworks Inc. and may not be used commercially without permission.

DIY Items

Make One Water Base Alcohol-Free Perfume

CW Clear Water Base

100ml × 1 EA

2.31 (USD)
Fresh Yuza Leaves (Allergen-Free)

20ml × 1 EA

5.77 (USD)
Castor Liquid Solubilizer CW-S

20ml × 1 EA

3.00 (USD)
LE BLANC 50

1pc × 1 EA

5.31 (USD)
06. LE BLANC 50 (PISA 50, LOWELL 50, INES 50) Perfume Box

1 pc × 1 EA

0.77 (USD)
Perfumery Electronic Scale 0.01g/500g

1pc × 1 EA

6.00 (USD)
Glass Beaker 100ml

1pc × 1 EA

1.92 (USD)
Glass Beaker 50ml

1pc × 1 EA

1.38 (USD)
Glass Rod

1pc × 1 EA

0.92 (USD)
Disposible Plastic Pipettes 3ml

1 Set × 1 EA

0.77 (USD)
Perfume Bottle Capping Machine 4-in-1

1 pc × 1 EA

500.00 (USD)
CW Spray Tool

1pc × 1 EA

0.38 (USD)
Mini Funnel

10pcs × 1 EA

0.54 (USD)
Avec Creme Printed Satin Ribbon (9mm/1 Roll)

1 Roll (18m) × 1 EA

3.77 (USD)
Layer of Perfume Label (square)

1Sheet(6pcs) × 1 EA

0.77 (USD)