PC Christmas Soldier Mold

Reviews 24 · 5

Size	Approximately 6 cm in diameter and 18 cm height (based on finished candle) Outside of the mold - approximately 12.4 cm width and 20.7 cm height
Material	Polycarbonate Plastic, Stainless Steel (Screws)
Amount of wax required	Approx. 135 g
Recommended Wick	Smokeless interlining #2-3, white cotton interlining #2-3
Characteristics	- A permanent plastic mold that can be reused multiple times. - We recommend using a blend of paraffin 160 or beeswax (3) : PB wax (7) in a ratio of 1:1. - New Soy PB is a harder type of PB and is prone to cracking during the cold winter months when temperatures are low, so we recommend using CW Seasonal Soy PB (for pillars) or Ecosoya Soy Wax PB (for pillars) whenever possible. - There are a total of 8 assembly screws that secure the mold to prevent wax leakage. - The use of hot air during mold cleaning and wax removal is not recommended as it can cause mold deformation. - If you are using a mold for the first time, using a release agent will make it easier to demold the wax from the mold. - With a detachable mold, there may be some lines on the sides of the finished candle from the joining.

1 EA 11.46 (USD)

Price 11.46 (USD)

Purchase options load in the storefront app

PC Christmas Soldier Mold

Inspired by the beloved Nutcracker prop for the winter season,
this PC Christmas Soldier mold is made for the holidays.

Semi-permanent polycarbonate plastic molds allow you to build
without worrying about wax leaks or crumbling.

The intricately detailed design is perfect for the holiday season
and can be used as a decorative candle for Christmas and winter.

Combine CW' wide selection of Christmas molds
and colors to create the perfect holiday look.

Point 1. Product Composition

The PC mold is approximately 6 cm in diameter and 18 cm height (based on the finished candle).
(Outside of the mold - approximately 12.4 cm width by 20.7 cm height)
You'll need about 135 grams of wax to make one candle.
We recommend using a blend of paraffin 160 or beeswax (3) : PB wax (7) for a glossy, solid candle.

Point 2. Molds Made Of Polycarbonate Plastic

It's a semi-permanent material that's most commonly used as a mold for merchandising and teaching.
The clear molds make it easy to see the color of your sculpted wax,
and you can use a variety of waxes, including soy, palm, and paraffin.
The round bottom base design makes it easy to secure and stabilize.

* Detachable molds may result in slight lines on the sides of the finished candle from joining.

Point 3. Configure Assembly Screws To Prevent Wax Leakage

There are a total of eight assembly screws that secure the detachable mold to prevent wax leakage.
The heads of the bolt screws are square to fit into the gaps between the molds,
and the handles of the nut screws allow for easy finger assembly without the need for tools.

Point 4. The Difference In Details

From the hat to the waist belt, this mold features a troop design
with intricate details that will come through clearly when creating your candle.
Different wax colors can create different moods, and when paired with our Christmas molds,
these candle molds are the perfect way to express your holiday mood.

PC Christmas Soldier Mold

Size	Approximately 6 cm in diameter and 18 cm height (based on finished candle) Outside of the mold - approximately 12.4 cm width and 20.7 cm height
Material	Polycarbonate Plastic, Stainless Steel (Screws)
Amount of wax required	Approx. 135 g
Recommended Wick	Smokeless interlining #2-3, white cotton interlining #2-3
Characteristics	- A permanent plastic mold that can be reused multiple times. - We recommend using a blend of paraffin 160 or beeswax (3) : PB wax (7) in a ratio of 1:1. - New Soy PB is a harder type of PB and is prone to cracking during the cold winter months when temperatures are low, so we recommend using CW Seasonal Soy PB (for pillars) or Ecosoya Soy Wax PB (for pillars) whenever possible. - There are a total of 8 assembly screws that secure the mold to prevent wax leakage. - The use of hot air during mold cleaning and wax removal is not recommended as it can cause mold deformation. - If you are using a mold for the first time, using a release agent will make it easier to demold the wax from the mold. - With a detachable mold, there may be some lines on the sides of the finished candle from the joining.