CANDLE

Making a Sphere Cloud Candle

Using a spherical PC Sphere Mold, make a cloud-shaped candle reminiscent of a blue sky and sweet cotton candy. Recalling the pleasant imagination of the laundry drying up in the sun,
add Clean Cotton Fragrance Oil to complete the candle.
Meet the more attractive cloud candles by adding a soft, powdery towel scent like a white cloud.

01

Need to Prepare

Material | PC Large Sphere Mold, CW Pillar Blend Wax, Blue Liquid Dye, Clean Cotton Fragrance Oil, Stainless Pot 450ml, White Cotton Wick No. 4 (Meter Unit/Uncoated Wick), ZAC Mold Sealer (Dabuchi), Glass Rod, Electronic Hot Plate, Electronic Scale, Digital Thermometer, Wick Clip, Paper Cup, 2 Stationery Clip

02

Measure and Melt Cloud Wax

Measure 50g of CW Pillar Blend Wax for cloud making in 450ml of Stainless Pot and melt it.

03

Making a Wax Formulation for Making Clouds

Pour the melted wax into a paper cup and stir it with a Glass Rod to lower the temperature and make a thick formulation.

04

Make a Cloud Shape

Using Glass Rod, the glass membrane is buried on the mold wall and creates a cloud shape and creates clouds.

* If you put the wine in the future, please put it into a thick cloud thickness.
** Make a cloud shape on both the top and bottom separated Sphere Molds.

05

Fixing the Wick

Combine the PC Large Sphere Molds separated up and down into one and secure them with tongs on both sides of the mold. Cut the white nose to the fixed mold 4 to the fixed mold, and fix the heart hole in the lower end of the lower end.

06

Metering and Melting Wax for Large Sphere Mold

Measure and melt 230g of CW Pillar Blend Wax required to manufacture one PC Large Sphere Mold.

07

Coloring

After the wax melts, add a Blue Liquid Dye and color it into the desired color.

* Oil Soluble Liquid Dye are highly concentrated dyes that can create deep colors and
clear colors even when used in a small amount.
** Determine the appropriate capacity while testing in small quantities.

08

Measure and Add the Fragrance Oil

When the temperature of the wax is about 75℃, add 23g of the fragrance oil, which is 10% of the wax.

* In the photo, Clean Cotton Fragrance Oil was used.

09

Pour Into The Mold

Preheat lightly to prevent the clouds inside the PC Large Sphere Mold with a heat tool and pour slowly when the wax temperature is 65 to 70℃. Use the Wick Clip to secure the wick.

10

Demolding

Carefully rotate the top and bottom of the waxed PC Large Sphere Mold to demold it from the mold.
Remove the top of the wick, and then remove the bottom as well.

Be careful not to apply too much force.